#!/bin/sh

set -e


case "$1" in
    configure)
        # ensure /var/lib/snapd/lib/gl is cleared
        if dpkg --compare-versions "$2" lt-nl "2.0.7"; then
            ldconfig
        fi

        # Ensure that we undo the damage done by the snap.mount unit that was present
        # in snapd 2.31.
        #
        # We found that update scripts make systemd stop inactive mount units and this
        # in turn stops all the units that depend on it so when the snap.mount unit is
        # stopped all the per-snap mount units gets stopped along with them.  The 2.31
        # release was only out briefly in xenial-proposed and bionic but to keep the
        # affected users safe let's start all the per-snap mount units so that snaps no
        # longer appear as broken after update.
        if dpkg --compare-versions "$2" ge-nl "2.31" && \
                dpkg --compare-versions "$2" lt-nl "2.32"; then
            units=$(systemctl list-unit-files --full | grep '^snap[-.]' | cut -f1 -d ' ' | grep -vF snap.mount.service || true)
            mounts=$(echo "$units" | grep '^snap[-.].*\.mount$' || true)
            for unit in $mounts; do
                # ensure its really a snap mount unit or systemd unit
                if ! grep -q 'What=/var/lib/snapd/snaps/' "/etc/systemd/system/$unit" && ! grep -q 'X-Snappy=yes' "/etc/systemd/system/$unit"; then
                    echo "Skipping non-snapd systemd unit $unit"
                    continue
                fi

                echo "Starting $unit"
                deb-systemd-invoke start "$unit" || true
            done
        fi
        # Ensure that the void directory has correct permissions.
        chmod 111 /var/lib/snapd/void
esac

# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.aa-prompt-listener.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.aa-prompt-listener.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.aa-prompt-listener.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.aa-prompt-listener.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.apparmor.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.apparmor.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.apparmor.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.apparmor.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.recovery-chooser-trigger.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.recovery-chooser-trigger.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.recovery-chooser-trigger.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.recovery-chooser-trigger.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.seeded.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.seeded.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.seeded.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.seeded.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.service' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# The following line should be removed in trixie or trixie+1
	deb-systemd-helper unmask 'snapd.socket' >/dev/null || true

	# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'snapd.socket'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'snapd.socket' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'snapd.socket' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installinit/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -x "$(command -v systemd-tmpfiles)" ]; then
		systemd-tmpfiles ${DPKG_ROOT:+--root="$DPKG_ROOT"} --create snapd.conf >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_start/13.11.4
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -z "${DPKG_ROOT:-}" ] && [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		deb-systemd-invoke start 'snapd.aa-prompt-listener.service' 'snapd.apparmor.service' 'snapd.recovery-chooser-trigger.service' 'snapd.seeded.service' 'snapd.service' 'snapd.socket' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_apparmor/3.0.8-3
if [ "$1" = "configure" ]; then
    APP_PROFILE="/etc/apparmor.d/usr.lib.snapd.snap-confine.real"
    if [ -f "$APP_PROFILE" ]; then
        # Add the local/ include
        LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.lib.snapd.snap-confine.real"

        test -e "$LOCAL_APP_PROFILE" || {
            mkdir -p `dirname "$LOCAL_APP_PROFILE"`
            install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
        }

        # Reload the profile, including any abstraction updates
        if aa-enabled --quiet 2>/dev/null; then
            apparmor_parser -r -T -W "$APP_PROFILE" || true
        fi
    fi
fi
# End automatically added section
# Automatically added by dh_installdeb/13.11.4
dpkg-maintscript-helper rm_conffile /etc/grub.d/09_snappy 1.7.3ubuntu1 -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/13.11.4
dpkg-maintscript-helper rm_conffile /etc/ld.so.conf.d/snappy.conf 2.0.7~ -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/13.11.4
dpkg-maintscript-helper rm_conffile /etc/apparmor.d/usr.lib.snapd.snap-confine 2.23.6~ snap-confine -- "$@"
# End automatically added section
# Automatically added by dh_installdeb/13.11.4
dpkg-maintscript-helper rm_conffile /etc/sudoers.d/99-snapd.conf 2.50~ -- "$@"
# End automatically added section